中文
English
IRF520S-VB Product details
Back to previous pageProduct introduction：
**Detailed parameter description and application introduction:**
This device is an N-Channel field effect transistor in a TO263 package, suitable for a variety of application scenarios. The main parameters include high voltage rating, high current rating, and low on-resistance, which enable it to have good performance under different power supply and load conditions.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO263 | Single-N | 100V | 1.8V | 20A | 100(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO263 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO263 | Single-N | 100V | 1.8V | 20A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO263 | Single-N | 100V | 1.8V | 20A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO263 | Single-N |
**Product model:** IRF520S-VB
**Silk screen:** VBL1101M
**Brand:** VBsemi
**Parameters:**
- Package:** TO263
- Type: N—Channel
- Rated voltage: 100V
- Rated current: 20A
- On-state resistance (RDS(ON)): 100mΩ @ VGS=10V,
--VGS=±20V
- Threshold voltage(Vth): 1.7V
**Package:** TO263
**Silk screen:** VBL1101M
**Brand:** VBsemi
**Parameters:**
- Package:** TO263
- Type: N—Channel
- Rated voltage: 100V
- Rated current: 20A
- On-state resistance (RDS(ON)): 100mΩ @ VGS=10V,
--VGS=±20V
- Threshold voltage(Vth): 1.7V
**Package:** TO263
Domain and module applications：
**Application areas:**
1. **Power module:** Due to its high voltage and high current ratings, it can be used in switching power supplies and inverters in power modules.
2. **Motor drive module:** Suitable for various motor drive modules such as industrial motors and electric vehicles.
3. **Electronic switch module:** In scenarios where high-power electronic switches are required, it can be used to implement electronic switches and level conversion.
**Function:**
- **Power module:** Used in switching power supplies and inverters to achieve high-efficiency power conversion.
- **Motor drive module:** Provides reliable high-current drive to control the operation of various motors.
- **Electronic switch module:** As part of the electronic switch, it ensures stable electronic switching and level conversion.
**Precautions for use:**
1. Please operate according to the maximum ratings provided in the data sheet to ensure the reliability and stability of the device.
2. Consider heat dissipation requirements in the design, especially in high current and high power applications.
3. Make sure to use it within the appropriate voltage range below the threshold voltage (Vth) to ensure normal operation.
4. Avoid exceeding the rated voltage and current to avoid damaging the device.
1. **Power module:** Due to its high voltage and high current ratings, it can be used in switching power supplies and inverters in power modules.
2. **Motor drive module:** Suitable for various motor drive modules such as industrial motors and electric vehicles.
3. **Electronic switch module:** In scenarios where high-power electronic switches are required, it can be used to implement electronic switches and level conversion.
**Function:**
- **Power module:** Used in switching power supplies and inverters to achieve high-efficiency power conversion.
- **Motor drive module:** Provides reliable high-current drive to control the operation of various motors.
- **Electronic switch module:** As part of the electronic switch, it ensures stable electronic switching and level conversion.
**Precautions for use:**
1. Please operate according to the maximum ratings provided in the data sheet to ensure the reliability and stability of the device.
2. Consider heat dissipation requirements in the design, especially in high current and high power applications.
3. Make sure to use it within the appropriate voltage range below the threshold voltage (Vth) to ensure normal operation.
4. Avoid exceeding the rated voltage and current to avoid damaging the device.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
