Featured Model

Your present location > Home page > Featured Model

DMP2240UW-7-VB Product details

Product introduction:

Model: DMP2240UW-7-VB
Silkscreen: VBK2298
Brand: VBsemi

This P-channel MOSFET is suitable for electronic circuits that require low-power P-channel devices, providing reliable current control and switching performance, and is often used in low-power electronics to improve efficiency and performance.

File download

Download PDF document
Download now

VBsemi online shopping mall:

Product parameter:

VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds2.5 Rds4.5 Rds10 Technology
SC70-3 Single-P -20V -0.6V -3.1A 100(mΩ) 80(mΩ) Trench
VB Package Configuration VCE VGE VGEth(V) VCEsat15V ICE Technology
SC70-3 Single-P Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds18 Technology
SC70-3 Single-P -20V -0.6V -3.1A Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds6 Technology
SC70-3 Single-P -20V -0.6V -3.1A Trench
VB Package Polarity Vz / VR Pd VF IF IR Cd Type
SC70-3 Single-P
Parameter Description:
- **P-channel:** This device is a P-channel MOSFET, the current flows in the P-channel, and is usually used in different types of applications, such as power switches.
- **Operating voltage (VDS):** -20V, which indicates the upper limit of the MOSFET's withstand voltage, and negative values indicate that the device is a P-channel.
- **Continuous current (ID):** -3A, which indicates the maximum current that the MOSFET can withstand. Negative values indicate that the current direction is opposite to that of the N-channel MOSFET.
- **On-resistance (RDS(ON)):** 98mΩ @ 4.5V, 117.6mΩ @ 2.5V, 12Vgs(±V), which indicates the resistance of the MOSFET when it is in the on state, and these two values correspond to different gate voltages.
- **Threshold voltage (Vth):** -0.6~-2V, which indicates the gate voltage range required for the MOSFET to enter the on state. Negative values indicate that the voltage polarity is opposite.
- **Package:** SC70-3, which is a small surface mount package.

Domain and module applications:

This P-channel MOSFET is suitable for a variety of low-power electronic applications, including but not limited to:

1. **Power Switch:** Used in low-power power switching circuits such as small DC-DC converters and power management units.

2. **Battery Protection:** Used in small battery protection circuits to control battery charging and discharging to prevent over-current and over-voltage.

3. **Signal Switch:** Used in small signal switching circuits such as signal amplifiers, audio amplifiers, and small sensor interfaces.

4. **LED Driver:** Used in low-power LED lighting applications to achieve efficient LED light control.

5. **Portable Devices:** Used for power management and signal switching in small portable electronic devices such as smart watches, headphones, and sensor modules.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features

Technical support:

* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours

Sample Req

QQ

Telephone

400-655-8788

WeChat

Shopping

Topping

Sample Req
Online
Telephone
WeChat