中文
English
4N06L23-VB Product details
Back to previous pageProduct introduction：
**Model: 4N06L23-VB**
**Silkscreen: VBE1638**
**Brand: VBsemi**
**Detailed parameter description:**
4N06L23-VB is an N-Channel field effect transistor, using TO252 package, suitable for occasions with an operating voltage of 60V and a current of 45A. Its on-resistance is 25mΩ at different gate-source voltages, which can provide a lower on-resistance and is suitable for high-power applications. The threshold voltage is 1.8V, which is suitable for a variety of circuit design requirements.
**Application introduction:**
This type of transistor is mainly used in various electronic devices and circuits, especially for applications requiring high current and low on-resistance. Common application areas include power management, power amplification, switching power supply, motor drive, etc.
**Precautions for use:**
1. **Operating voltage limit:** Do not exceed the specified maximum operating voltage to prevent device damage.
2. **Current limit:** Make sure to use it within the specified current range. Exceeding the rated current may cause overheating and failure.
3. **Threshold voltage adaptation:** When designing the circuit, ensure that the gate-source voltage is within the specified range to ensure normal operation.
4. **Heat dissipation:** In high-power applications, appropriate heat dissipation measures are required to ensure that the device operates within the appropriate temperature range.
5. **Avoid static electricity:** Avoid static electricity during handling and use, and take anti-static measures to avoid damage to the device.
The above are some common precautions for use. The specific details of use need to be adjusted according to the specific circuit design and application environment. Please be sure to refer to the data sheet and the guidance provided by the manufacturer to ensure correct use and application.
**Silkscreen: VBE1638**
**Brand: VBsemi**
**Detailed parameter description:**
4N06L23-VB is an N-Channel field effect transistor, using TO252 package, suitable for occasions with an operating voltage of 60V and a current of 45A. Its on-resistance is 25mΩ at different gate-source voltages, which can provide a lower on-resistance and is suitable for high-power applications. The threshold voltage is 1.8V, which is suitable for a variety of circuit design requirements.
**Application introduction:**
This type of transistor is mainly used in various electronic devices and circuits, especially for applications requiring high current and low on-resistance. Common application areas include power management, power amplification, switching power supply, motor drive, etc.
**Precautions for use:**
1. **Operating voltage limit:** Do not exceed the specified maximum operating voltage to prevent device damage.
2. **Current limit:** Make sure to use it within the specified current range. Exceeding the rated current may cause overheating and failure.
3. **Threshold voltage adaptation:** When designing the circuit, ensure that the gate-source voltage is within the specified range to ensure normal operation.
4. **Heat dissipation:** In high-power applications, appropriate heat dissipation measures are required to ensure that the device operates within the appropriate temperature range.
5. **Avoid static electricity:** Avoid static electricity during handling and use, and take anti-static measures to avoid damage to the device.
The above are some common precautions for use. The specific details of use need to be adjusted according to the specific circuit design and application environment. Please be sure to refer to the data sheet and the guidance provided by the manufacturer to ensure correct use and application.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 45A | 30(mΩ) | 25(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 45A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| TO252 | Single-N | 60V | 1.7V | 45A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| TO252 | Single-N |
**Parameters:**
- Package: TO252
- Type: N-Channel
- Rated voltage: 60V
- Rated current: 45A
- On resistance (RDS(ON)): 25mΩ (at VGS=10V;
--VGS=±20V)
- Threshold voltage (Vth): 1.8V
**Package:**
- Package type: TO252
- Package: TO252
- Type: N-Channel
- Rated voltage: 60V
- Rated current: 45A
- On resistance (RDS(ON)): 25mΩ (at VGS=10V;
--VGS=±20V)
- Threshold voltage (Vth): 1.8V
**Package:**
- Package type: TO252
Domain and module applications：
**Application field module:**
1. **Power management module:** In the power management circuit, this transistor can be used for power switching and power regulation, effectively controlling the stability and efficiency of the circuit.
2. **Power amplifier module:** Due to its higher current and low on-resistance, it can be used in power amplifier circuits such as audio amplifiers, etc.
3. **Switching power supply module:** In the switching power supply, this transistor can be used for switching regulation and power amplification, providing reliable switching performance.
4. **Motor drive module:** Suitable for motor control circuits, providing sufficient current and low resistance to ensure the normal operation of the motor.
**Precautions for use:**
1. **Working voltage limit:** Do not exceed the specified maximum working voltage to prevent device damage.
2. **Current limit:** Make sure to use it within the specified current range. Exceeding the rated current may cause overheating and failure.
3. **Threshold voltage adaptation:** When designing the circuit, make sure the gate-source voltage is within the specified range to ensure normal operation.
4. **Heat dissipation:** In high power applications, proper heat dissipation measures are required to ensure that the device operates within the appropriate temperature range.
5. **Avoid static electricity:** Avoid static electricity during handling and use, and take anti-static measures to avoid damage to the device.
The above are some common usage precautions. The specific usage details need to be adjusted according to the specific circuit design and application environment. Please be sure to refer to the data sheet and the guidance provided by the manufacturer to ensure correct use and application.
1. **Power management module:** In the power management circuit, this transistor can be used for power switching and power regulation, effectively controlling the stability and efficiency of the circuit.
2. **Power amplifier module:** Due to its higher current and low on-resistance, it can be used in power amplifier circuits such as audio amplifiers, etc.
3. **Switching power supply module:** In the switching power supply, this transistor can be used for switching regulation and power amplification, providing reliable switching performance.
4. **Motor drive module:** Suitable for motor control circuits, providing sufficient current and low resistance to ensure the normal operation of the motor.
**Precautions for use:**
1. **Working voltage limit:** Do not exceed the specified maximum working voltage to prevent device damage.
2. **Current limit:** Make sure to use it within the specified current range. Exceeding the rated current may cause overheating and failure.
3. **Threshold voltage adaptation:** When designing the circuit, make sure the gate-source voltage is within the specified range to ensure normal operation.
4. **Heat dissipation:** In high power applications, proper heat dissipation measures are required to ensure that the device operates within the appropriate temperature range.
5. **Avoid static electricity:** Avoid static electricity during handling and use, and take anti-static measures to avoid damage to the device.
The above are some common usage precautions. The specific usage details need to be adjusted according to the specific circuit design and application environment. Please be sure to refer to the data sheet and the guidance provided by the manufacturer to ensure correct use and application.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
