Featured Model

Your present location > Home page > Featured Model

MDS3754ARH-VB Product details

Product introduction:



Application Introduction:
This P-Channel MOSFET is suitable for power switch applications that require a P-Channel channel, and is typically used in power management, motor control, and other high-performance circuit designs. Its low on-resistance and high switching speed give it superior performance in systems that require high efficiency.

File download

Download PDF document
Download now

VBsemi online shopping mall:

Product parameter:

VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds2.5 Rds4.5 Rds10 Technology
SOP8 Single-P -40V -2V 16.1A 14(mΩ) 10(mΩ) Trench
VB Package Configuration VCE VGE VGEth(V) VCEsat15V ICE Technology
SOP8 Single-P Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds18 Technology
SOP8 Single-P -40V -2V 16.1A Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds6 Technology
SOP8 Single-P -40V -2V 16.1A Trench
VB Package Polarity Vz / VR Pd VF IF IR Cd Type
SOP8 Single-P
VBsemi MDS3754ARH-VB P—Channel MOSFET Parameters:
- Package: SOP8
- Channel type: P—Channel
- Maximum voltage: 40V
- Maximum current: 11A
- RDS(ON):13mΩ @ VGS=10V,
--VGS=±20V
- Threshold voltage: -1.7V

Domain and module applications:

Modules for application areas:
1. Power management: used in power switch and power inverter design, providing high performance of P-Channel channel.
2. Motor control: suitable for high-power motor control systems that require P-Channel channel.
3. Automotive electronics: used for power switch and power management in automotive electronic circuits.

Function:
1. Provide P-Channel channel, suitable for power switch design.
2. Used in high-power applications that require P-Channel channel, such as power inverter and motor control system.
3. Achieve low on-resistance and high efficiency in high-performance circuit design.

Precautions for use:
1. Please operate according to the maximum ratings provided in the data sheet to avoid damage to the device.
2. Consider appropriate heat dissipation measures in the design to ensure stable operation of the device at the rated operating temperature.
3. Avoid exceeding the maximum rated current and voltage to prevent overloading of the device.
4. During use, pay attention to electrostatic protection to avoid damage to sensitive components.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features

Technical support:

* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours

Sample Req

QQ

Telephone

400-655-8788

WeChat

Shopping

Topping

Sample Req
Online
Telephone
WeChat