中文
English
STT5PF20V-VB Product details
Back to previous pageProduct introduction：
Application Introduction:
STT5PF±20V-VB is a P-Channel MOSFET in SOT23-6 package with maximum voltage -30V, maximum current -4.8A, and low on-resistance. Its on-resistance is 49mΩ at VGS of 10V and ±20V respectively. This device is suitable for electronic applications requiring P-Channel MOSFET.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Single-P | -30V | -1.7V | -4.8A | 54(mΩ) | 49(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Single-P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Single-P | -30V | -1.7V | -4.8A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Single-P | -30V | -1.7V | -4.8A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Single-P |
Model: STT5PF±20V-VB
Silkscreen: VB8338
Brand: VBsemi
Parameters:
- Package: SOT23-6
- Channel type: P-Channel
- Maximum voltage (Vds): -30V
- Maximum current (Id): -4.8A
- On resistance (RDS(ON)): 49mΩ @ VGS=10V,
--VGS=±20V
- Threshold voltage (Vth): -1~-3V
Silkscreen: VB8338
Brand: VBsemi
Parameters:
- Package: SOT23-6
- Channel type: P-Channel
- Maximum voltage (Vds): -30V
- Maximum current (Id): -4.8A
- On resistance (RDS(ON)): 49mΩ @ VGS=10V,
--VGS=±20V
- Threshold voltage (Vth): -1~-3V
Domain and module applications：
Applications:
This device may be widely used in a variety of electronic applications, including but not limited to:
- Power switch
- Battery management
- Power inverter
- Power management
Function:
On these modules, STT5PF±20V-VB can be used as a power switch to help achieve efficient power conversion and power management. It can act as a switch in the circuit to control the on and off of current, thereby regulating the power output.
Precautions for use:
When using STT5PF±20V-VB, please pay attention to the following:
1. Please make sure to use it within the specified voltage and current range to avoid damage to the device.
2. Follow the operating conditions and limitations in the data sheet provided by the manufacturer.
3. Proper heat dissipation is important, especially in high current applications, to ensure that the device maintains the appropriate temperature during operation.
4. Pay attention to the threshold voltage range and ensure that it is operated within the appropriate voltage range.
The above information is for reference only. Specific applications and precautions may need to be adjusted according to specific circuit design and application requirements.
This device may be widely used in a variety of electronic applications, including but not limited to:
- Power switch
- Battery management
- Power inverter
- Power management
Function:
On these modules, STT5PF±20V-VB can be used as a power switch to help achieve efficient power conversion and power management. It can act as a switch in the circuit to control the on and off of current, thereby regulating the power output.
Precautions for use:
When using STT5PF±20V-VB, please pay attention to the following:
1. Please make sure to use it within the specified voltage and current range to avoid damage to the device.
2. Follow the operating conditions and limitations in the data sheet provided by the manufacturer.
3. Proper heat dissipation is important, especially in high current applications, to ensure that the device maintains the appropriate temperature during operation.
4. Pay attention to the threshold voltage range and ensure that it is operated within the appropriate voltage range.
The above information is for reference only. Specific applications and precautions may need to be adjusted according to specific circuit design and application requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
