中文
English
QM2607C1-VB Product details
Back to previous pageProduct introduction：
### Product Introduction
#### QM2607C1-VB
**Brand:** VBsemi
**Silkscreen:** VB5222
**Package:** SOT23-6
**Introduction:**
QM2607C1-VB is a MOSFET device produced by VBsemi, using SOT23-6 package. It integrates two N-channel and P-channel MOSFETs with good switching performance and low on-resistance. This makes it have a wide range of application potential in high-efficiency and high-density circuit design.
---
---
#### QM2607C1-VB
**Brand:** VBsemi
**Silkscreen:** VB5222
**Package:** SOT23-6
**Introduction:**
QM2607C1-VB is a MOSFET device produced by VBsemi, using SOT23-6 package. It integrates two N-channel and P-channel MOSFETs with good switching performance and low on-resistance. This makes it have a wide range of application potential in high-efficiency and high-density circuit design.
---
---
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-N+P | ±20V | 1.0/-1.2V | 5.5/3.4A | 30/79(mΩ) | 22/55(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-N+P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-N+P | ±20V | 1.0/-1.2V | 5.5/3.4A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-N+P | ±20V | 1.0/-1.2V | 5.5/3.4A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-N+P |
### Detailed parameter description
- **Package: ** SOT23-6
- **MOSFET type: ** Dual channel (N+P channel)
- **Maximum rated voltage (VDS): ** ±±20V
- **Maximum on-state current (ID): **
- N channel: 7A
- P channel: -4.5A
- **On-state resistance (RDS(ON)): **
- N channel: 30(mΩ) @ VGS=4.5V
- P channel: 79(mΩ) @ VGS=4.5V
- **Gate drive voltage (VGS): ** ±±20V
- **Threshold voltage (Vth): **
- N channel: 0.71V
- P channel: -0.81V
- **Package: ** SOT23-6
- **MOSFET type: ** Dual channel (N+P channel)
- **Maximum rated voltage (VDS): ** ±±20V
- **Maximum on-state current (ID): **
- N channel: 7A
- P channel: -4.5A
- **On-state resistance (RDS(ON)): **
- N channel: 30(mΩ) @ VGS=4.5V
- P channel: 79(mΩ) @ VGS=4.5V
- **Gate drive voltage (VGS): ** ±±20V
- **Threshold voltage (Vth): **
- N channel: 0.71V
- P channel: -0.81V
Domain and module applications：
### Application fields and module examples
#### Fields:
1. **Consumer electronics:**
QM2607C1-VB can be used in power management modules for consumer electronics such as smartphones, tablets, and laptops. These devices require efficient power switching and current control. With its low on-resistance and high current carrying capacity, QM2607C1-VB can effectively reduce energy loss and improve the endurance of the device.
2. **Industrial control:**
In industrial control systems, QM2607C1-VB can be used in applications such as motor drive and relay drive. Its dual-channel design can achieve flexible switching of positive and negative currents to meet complex industrial control requirements.
3. **Communication equipment:**
This device is suitable for power modules of communication equipment such as routers, switches, and base stations. The efficient switching characteristics of QM2607C1-VB can ensure the stable operation of communication equipment under high-frequency signal transmission.
#### Module Examples:
1. **DC-DC Converter:**
QM2607C1-VB can be integrated in DC-DC converters for efficient energy conversion and voltage regulation. Its low RDS(ON) characteristics can improve conversion efficiency and reduce heat loss, making it suitable for power management of portable electronic devices.
2. **Battery Management System (BMS):**
In electric vehicles and energy storage systems, QM2607C1-VB can be used in battery management systems to achieve battery charge and discharge control and protection. Its high current carrying capacity and reliable performance ensure the safety and stability of the system.
3. **Load Switch:**
As a load switch, QM2607C1-VB can be used in various power switching circuits to achieve power management and protection of equipment. Its fast response and low on-resistance ensure low power consumption and high reliability during the switching process.
The versatility and high performance of QM2607C1-VB make it an indispensable key component in various electronic products and systems.
#### Fields:
1. **Consumer electronics:**
QM2607C1-VB can be used in power management modules for consumer electronics such as smartphones, tablets, and laptops. These devices require efficient power switching and current control. With its low on-resistance and high current carrying capacity, QM2607C1-VB can effectively reduce energy loss and improve the endurance of the device.
2. **Industrial control:**
In industrial control systems, QM2607C1-VB can be used in applications such as motor drive and relay drive. Its dual-channel design can achieve flexible switching of positive and negative currents to meet complex industrial control requirements.
3. **Communication equipment:**
This device is suitable for power modules of communication equipment such as routers, switches, and base stations. The efficient switching characteristics of QM2607C1-VB can ensure the stable operation of communication equipment under high-frequency signal transmission.
#### Module Examples:
1. **DC-DC Converter:**
QM2607C1-VB can be integrated in DC-DC converters for efficient energy conversion and voltage regulation. Its low RDS(ON) characteristics can improve conversion efficiency and reduce heat loss, making it suitable for power management of portable electronic devices.
2. **Battery Management System (BMS):**
In electric vehicles and energy storage systems, QM2607C1-VB can be used in battery management systems to achieve battery charge and discharge control and protection. Its high current carrying capacity and reliable performance ensure the safety and stability of the system.
3. **Load Switch:**
As a load switch, QM2607C1-VB can be used in various power switching circuits to achieve power management and protection of equipment. Its fast response and low on-resistance ensure low power consumption and high reliability during the switching process.
The versatility and high performance of QM2607C1-VB make it an indispensable key component in various electronic products and systems.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
