中文
English
UT9435-AB162-R-VB Product details
Back to previous pageProduct introduction：
UT9435-AB162-R-VB is a dual P-channel MOSFET launched by VBsemi, with the silkscreen VB4290 and SOT23-6 package. The main feature of this MOSFET is the dual P-channel design, which is suitable for circuits that require negative control.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | 100（mΩ） | 75(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P | -20V | -0.6V | -4A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-6 | Dual-P+P |
The main parameters are as follows:
- Rated voltage (VDS): -20V
- Rated current (ID): -4A
- Switch resistance (RDS(ON)): 75mΩ (at VGS=4.5V and;
VGS=±12V; )
- Threshold voltage (Vth): -1.2V to -2.2V
- Rated voltage (VDS): -20V
- Rated current (ID): -4A
- Switch resistance (RDS(ON)): 75mΩ (at VGS=4.5V and;
VGS=±12V; )
- Threshold voltage (Vth): -1.2V to -2.2V
Domain and module applications：
This product is suitable for the following fields and modules:
1. Battery management: can be used for the negative control part in the charge and discharge protection circuit.
2. Signal switch: suitable for circuits that require negative signal switching, such as audio signal switching.
3. Power inverter: can be used for the negative switching part in low-power power inverter.
4. Sensor interface: suitable for the negative signal processing part in the sensor interface circuit.
5. Analog switch: can be used for the negative switching part in the analog switch circuit.
1. Battery management: can be used for the negative control part in the charge and discharge protection circuit.
2. Signal switch: suitable for circuits that require negative signal switching, such as audio signal switching.
3. Power inverter: can be used for the negative switching part in low-power power inverter.
4. Sensor interface: suitable for the negative signal processing part in the sensor interface circuit.
5. Analog switch: can be used for the negative switching part in the analog switch circuit.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
