Product introduction：
**Detailed parameter description:**
1. **Channel type:** P-Channel, indicating that this is a P-channel MOSFET.
2. **Maximum voltage (VDS):** -60V, indicating the maximum drain-source voltage that the device can withstand.
3. **Maximum current (ID):** -5.2A, indicating the maximum drain current that the device can withstand.
4. **On-resistance (RDS(ON)):** 40mΩ @ VGS=10V,
--VGS=±20V, this is the drain-source resistance in the on state at different gate voltages.
5. **Gate threshold voltage (Vth):** -2V, is the maximum gate voltage required to put the device into the on state.
**Application introduction:**
AP2311GN-HF-VB is a P-channel field effect transistor (MOSFET), commonly used in low-voltage, low-power power management and switching power supply applications. Its features include small size and low power consumption, making it suitable for portable devices and battery-powered applications.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOT23-3 |
Single-P |
-60V |
±20V |
-1.7V |
-5.2A |
|
52(mΩ) |
50(mΩ) |
|
Model: AP2311GN-HF-VB
Silkscreen: VB2658
Brand: VBsemi
Package: SOT23-3
Channel type: P—Channel
Maximum voltage (VDS): -60V
Maximum current (ID): -5.2A
On-resistance (RDS(ON)): 40mΩ @ VGS=10V,
--VGS=±20V
Gate threshold voltage (Vth): -2V
Domain and module applications：
**Application fields:**
1. **Power management module:** Used in low-power power management modules, such as portable devices, wireless sensor nodes, etc.
2. **Battery management:** Suitable for battery-powered circuits, which can help achieve low power consumption and high efficiency.
3. **Portable devices:** Power management circuits in portable devices such as mobile phones and tablets.
4. **LED lighting control:** Used in LED lighting drive circuits that require P-channel MOSFETs.
**Precautions for use:**
1. **Maximum ratings:** Do not exceed the maximum current and voltage values specified in the device specifications.
2. **Heat dissipation:** For high-power applications, proper heat dissipation is required to ensure that the device operates at normal operating temperature.
3. **Electrostatic protection:** When handling and installing the device, please take electrostatic protection measures to prevent electrostatic discharge from damaging the device.
4. **Application circuit design:** When designing the circuit, please refer to the data sheet and application notes provided by the manufacturer to ensure the correct power supply and control circuit.
Please note that the above information is general advice based on the parameters provided and general experience. In actual applications, please always refer to the specific data sheets and application guides provided by the manufacturer.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
