Product introduction：
This product uses a P-Channel channel, which is suitable for applications where the load is under a negative power supply. - **Maximum Operating Voltage:** The product supports a maximum operating voltage of -20V, which is suitable for circuits that require a negative power supply. - **Maximum Current:** The product supports a maximum current of -4A, which is suitable for circuits with medium power requirements. - **On-Resistance:** Under the conditions of VGS=4.5V and VGS=12V, the on-resistance is 65(mΩ), 80(mΩ)@VGS=2.5V, and 60(mΩ)@VGS=10V;, indicating that the product has a lower resistance when it is in the on state, which is beneficial to circuit efficiency. - **Threshold Voltage:** The threshold voltage of the product is -0.81V, which is the voltage at which the channel starts to conduct.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOT23-3 |
Single-P-Channel |
-20V |
12（±V） |
-0.8V |
-4A |
80（mΩ） |
65(mΩ) |
60(mΩ) |
|
**Parameters:** - Package type: SOT23-3 - Channel type: P-Channel - Maximum operating voltage: -20V - Maximum current: -4A - On resistance: RDS(ON)=80 (mΩ)@VGS=2.5V, 65 (mΩ)@VGS=4.5V, 60 (mΩ)@VGS=10V; VGS=12V - Threshold voltage: Vth=-0.81V **Package:** - Package type: SOT23-3
Domain and module applications：
This product is suitable for SOT23-3 package, P-Channel channel, especially suitable for the following fields and modules: 1. **Power management module:** Since the product supports negative power supply, it can be used in power management module to ensure power efficiency and stability. 2. **Current control module:** The product supports a maximum current of -4A, suitable for modules that require precise control of current, such as current control drivers. 3. **Load switch module:** The design of P-Channel channel makes it suitable for switch modules with loads under negative power supply, such as load switch power supply. 4. **Power inverter module:** Since the product has a lower turn-on resistance, it can be used in power inverter module to improve inverter efficiency. Please choose whether to use EMF44P02J-VB products according to specific circuit design requirements and application scenarios, and ensure that they meet relevant electrical specifications and requirements.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
