Product model: NCE2303-VB Silk screen: VB2355 Brand: VBsemi Application introduction: NCE2303-VB is a P-Channel field effect transistor, suitable for various circuit designs that require P-channel devices. Common application areas and modules include but are not limited to:
parameter: -Package type: SOT23-3 -Channel type: P—Channel -Maximum withstand voltage: -30V-Maximum current: -5.6A-Turn on the resistor (RDS(ON)): 47mΩ @ VGS=10V, VGS=20V -threshold voltage (vth): -1VPackage: SOT23-3Detailed parameter description: 1. **Package type (Package Type):**SOT23-3, this small package is suitable for space-constrained applications and has good heat dissipation performance. 2. **Channel Type (Channel Type):**P—Channel, indicating that this is aPTrench FET, usually used in load switches and power amplifiers. 3. **Maximum withstand voltage (Maximum Drain-Source Voltage):** -30V, refers to the maximum voltage that the device can safely withstand. 4. **Maximum current(Maximum Continuous Drain Current):** -5.6Aindicating the maximum current that the device can withstand under normal operating conditions. 5. **Turn on the resistor (On-Resistance):** 47mΩ @ VGS=10V, VGS=20V, indicating that at a given gate-The on-resistance of the device at source voltage. 6. **threshold voltage (Threshold Voltage):** -1V, refers to the voltage that the gate needs to reach when the channel is open.
Domain and module applications：
1. **Load switch: **due to itsPChannel characteristics, suitable for load switching circuits, can be used for power management and current control. 2. **Power amplifier: **In some audio and RF applications,PTrench field effect transistors can be used as key components of power amplifiers. 3. **Power management module: **Due to its high current and low on-resistance, it can be used to design power management modules to improve power efficiency. 4. **Current control module: **Suitable for circuits that require precise control of current, such as motor drives and constant current sources. These features and applications makeNCE2303-VBIt has become a versatile device in the electronic field and is widely used in various circuit designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
*To request free samples, please complete and submit the following information. Our team will review your application within 24 hours and arrange shipment upon approval. Thank you!
X
SN Check
***Serial Number Lookup Prompt**
1. Enter the complete serial number, including all letters and numbers.
2. Click Submit to proceed with verification.
The system will verify the validity of the serial number and its corresponding product information to help you confirm its authenticity.
If you notice any inconsistencies or have any questions, please immediately contact our customer service team. You can also call 400-655-8788 for manual verification to ensure that the product you purchased is authentic.
Download now
中文
English
Back to previous page
