中文
English
CMN3415M-VB Product details
Back to previous pageProduct introduction：
Product Introduction: CMN3415M-VB is a P-Channel channel MOSFET produced by VBsemi, with a voltage resistance of -30V and a rated current of -5.6A. Its package is SOT23-3, which is suitable for a variety of electronic application scenarios.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P-Channel | -30V | -1.7V | -5.6A | 54(mΩ) | 46(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P-Channel | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P-Channel | -30V | -1.7V | -5.6A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P-Channel | -30V | -1.7V | -5.6A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P-Channel |
Detailed parameter description: -Pressure resistance: -30V-Maximum drain current: -5.6A-Turn on the resistor (RDS(ON)): 47mΩ @ VGS=10V, VGS=20V -threshold voltage (vth): -1V-Package:SOT23-3
Domain and module applications：
Examples of applicable fields and modules:This product is suitable for the following areas and modules: 1.
Power Management Modules: Power switches for low voltage drop, e.
g.
DC-DCconverters and switching regulators.
2.
Battery protection circuit: It can be used as a protection circuit in battery charge and discharge management, such as overload protection and short circuit protection.
3.
Motor drive: Suitable for drive circuits of small DC motors, such as motor drives in power tools and household appliances.
4.
LEDDriver: Available forledCurrent control and dimming control circuits for lighting fixtures.
5.
Analog switch: It can be used for current control and signal switching in analog switching circuits, such as the amplification and switching of audio signals.
Power Management Modules: Power switches for low voltage drop, e.
g.
DC-DCconverters and switching regulators.
2.
Battery protection circuit: It can be used as a protection circuit in battery charge and discharge management, such as overload protection and short circuit protection.
3.
Motor drive: Suitable for drive circuits of small DC motors, such as motor drives in power tools and household appliances.
4.
LEDDriver: Available forledCurrent control and dimming control circuits for lighting fixtures.
5.
Analog switch: It can be used for current control and signal switching in analog switching circuits, such as the amplification and switching of audio signals.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
