中文
English
DMG2302U-7-VB Product details
Back to previous pageProduct introduction：
**Application Introduction:** This device is an N-Channel field effect transistor in a SOT23 package, suitable for a variety of applications.
Key parameters include low voltage rating, high current rating, and low on-resistance, enabling good performance under different power and load conditions.
Key parameters include low voltage rating, high current rating, and low on-resistance, enabling good performance under different power and load conditions.
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N-Channel | 20V | 0.5~1.5V | 6A | 42（mΩ） | 28(mΩ) | Trench |
| VB Package | Configuration | VCE | VGE | VGEth(V) | VCEsat15V | ICE | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N-Channel | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds18 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N-Channel | 20V | 0.5~1.5V | 6A | Trench |
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds6 | Technology |
|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N-Channel | 20V | 0.5~1.5V | 6A | Trench |
| VB Package | Polarity | Vz / VR | Pd | VF | IF | IR | Cd | Type |
|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-N-Channel |
**Product number:**DMG2302U-7-VB**Silkscreen:** VB1240 **brand:** VBsemi **parameter :** -Encapsulation : SOT23 -type: N—ChannelChannel -Rated voltage : 20V -Rated current : 6A -On-state resistance (RDS(ON)): RDS(ON)=28(mΩ)@VGS=4.
5V,42（mΩ） @VGS=2.
5V; VGS=8V -Threshold voltage (Vth): 0.
5~1.
5V **Encapsulation :** SOT23
5V,42（mΩ） @VGS=2.
5V; VGS=8V -Threshold voltage (Vth): 0.
5~1.
5V **Encapsulation :** SOT23
Domain and module applications：
**Application Areas:** 1.
**Power switch module :**Due to its low voltage and high current rating, it can be used for switching power supplies and voltage regulation in power switch modules.
2.
**Battery protection module :**Suitable for mobile devices and battery-powered systems, providing reliable protection for batteries.
3.
LEDDriver module :**Where high performance is requiredledIn the driven scenario, it can be usedledCurrent control and switching in lighting systems.
**effect:** - **Power switch module :**Used for switching power supply and voltage regulation to achieve high-efficiency power conversion.
- **Battery protection module :**Provides reliable protection for batteries against over-current and over-voltage.
- **LEDDriver module :**AsledPart of the lighting system, ensuringledHigh-efficiency drive and brightness control.
**Precautions for use :** 1.
Please operate within the maximum ratings provided in the data sheet to ensure device reliability and stability.
2.
Consider heat dissipation requirements in your design, especially in high current and high power applications.
3.
Ensure that the threshold voltage (Vthshould be used within the appropriate voltage range to ensure normal operation.
4.
Avoid exceeding the rated voltage and current to avoid damaging the device.
**Power switch module :**Due to its low voltage and high current rating, it can be used for switching power supplies and voltage regulation in power switch modules.
2.
**Battery protection module :**Suitable for mobile devices and battery-powered systems, providing reliable protection for batteries.
3.
LEDDriver module :**Where high performance is requiredledIn the driven scenario, it can be usedledCurrent control and switching in lighting systems.
**effect:** - **Power switch module :**Used for switching power supply and voltage regulation to achieve high-efficiency power conversion.
- **Battery protection module :**Provides reliable protection for batteries against over-current and over-voltage.
- **LEDDriver module :**AsledPart of the lighting system, ensuringledHigh-efficiency drive and brightness control.
**Precautions for use :** 1.
Please operate within the maximum ratings provided in the data sheet to ensure device reliability and stability.
2.
Consider heat dissipation requirements in your design, especially in high current and high power applications.
3.
Ensure that the threshold voltage (Vthshould be used within the appropriate voltage range to ensure normal operation.
4.
Avoid exceeding the rated voltage and current to avoid damaging the device.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
