Model: ST2305A-VB.
.
Silk screen: VB2355.
.
Brand: VBsemi.
.
### Detailed parameter description:.
.
- **Package type:** SOT23.
- **Channel type:** P-Channel.
- **Rated voltage (VDS):** -30V.
- **Maximum continuous current (ID):** -5.6A.
- **On-resistance (RDS(ON)):**.
- @ VGS = 10V: 47mΩ.
- @ VGS = 20V: No specific value is provided.
- **Threshold voltage (Vth):** -1V.
.
### Application introduction:.
.
ST2305A-VB is a P-Channel field effect transistor in SOT23 package. Due to its P-Channel characteristics, it is suitable for some scenarios that require negative power supply voltage, such as low-power load switching. .
.
### Applicable fields and modules: .
.
1. **Low-power power switch:** Due to its smaller current capability and low on-resistance, ST2305A-VB is suitable for low-power load switching, such as power management modules in portable electronic devices. .
.
2. **Battery management system:** In battery management systems that require negative power supply voltage, ST2305A-VB can be used to implement low-power consumption switching functions. .
.
3. **Sensor interface:** Suitable for some sensor interface circuits, especially those that require negative power supply voltage. .
.
### Precautions for use: .
.
1. **Voltage level:** During use, make sure not to exceed the rated voltage -30V. .
.
2. **Current Limitation:** Do not exceed the specified maximum continuous current, which is -5.6A. .
.
3. **Threshold Voltage:** Note that the threshold voltage is -1V, and the appropriate voltage range needs to be considered when designing the circuit. .
.
4. **Heat Dissipation:** Due to its low power characteristics, additional heat dissipation is usually not required. However, if required in special cases, please refer to the manufacturer's recommendations. .
.
5. **Static Electrostatic Protection:** During operation, take appropriate static electrostatic protection measures to prevent damage to the transistor. .
.
Please note that this is only a basic overview, and the specific design and application needs to be carried out according to the specific project requirements and the manufacturer's recommendations. Before using the device, be sure to consult the relevant datasheet and technical documentation for detailed information and guidance.