FDS8949-NL-VB, a 2个N-channel SOP8 MOSFET datasheet parameters video explanation

This model FDS8949-NL-VB, with the silkscreen VBA3638, is an electronic component produced by the VBsemi brand. Its parameters are 2 N-channels, 60V, 6A, RDS(ON) is 27mΩ@10V, 32mΩ@4.5V, 20Vgs(±V), 1.5Vth(V), and the package is SOP8. .
.
Detailed parameter description: .
- 2 N-channels means that there are two N-channel MOS tubes inside the component. .
- 60V means that the maximum operating voltage of the component is 60V. .
- 6A means that the maximum operating current of the component is 6A. .
- RDS(ON) represents the on-resistance in the open state, which is 27mΩ@10V and 32mΩ@4.5V respectively. This means that at 10V and 4.5V, the on-resistance of the component is 27mΩ and 32mΩ respectively. .
- 20Vgs(±V) means that the maximum gate-source voltage of the component is 20V, that is, when the gate-source voltage is less than or equal to 20V, the component works normally. .
- 1.5Vth(V) means that the threshold voltage is 1.5V, that is, when the gate-source voltage is less than 1.5V, the component is in the off state. .
.
Application Introduction: .
This component is usually used in the field of power electronics and can be widely used in the following modules: .
- Power module: used for power switch control, load switch control, power supply voltage regulation, etc. .
- Drive module: used for motor drive, LED drive, display drive, etc. .
- Reverse protection module: used for reverse protection of circuit, battery charge and discharge control, etc. .
- Switch module: used for switch control, relay control, etc. .
.
In short, the FDS8949-NL-VB is suitable for occasions where high voltage and high current need to be controlled, and is particularly suitable for various module applications in the field of power electronics. .