You are designing a high-power DC-DC converter or power tool power supply, where the PCB must handle 70A transient current and stringent thermal conditions. Ordinary MOSFETs either suffer from high conduction losses or have packages that limit current capability. The VBsemi DMNH4006SPS-13-VB is the hardcore choice designed for this—it integrates 40V withstand voltage, 70A current carrying capacity, and an ultra-low on-resistance of 4.7mΩ into a compact DFN8(5X6) package, allowing high-power-density power designs to both "handle the load" and "dissipate the heat."
- Drain-Source Voltage (VDS): 40V, suitable for low-voltage high-current systems with ample safety margin - Gate-Source Voltage (VGS): ±20V, compatible with multiple drive levels, strong anti-interference capability - Threshold Voltage (Vth): 2.5V, clear switching characteristics, easy drive circuit design - On-Resistance: 4.7mΩ (at 10V drive), 6mΩ (at 4.5V drive), extremely low loss under high current - Maximum Drain Current (ID): 70A, delivers impressive power in DFN8(5X6) small package - Trench technology, optimized on-resistance and switching performance
Domain and module applications：
- High-Power DC-DC Buck/Boost Modules – Used as the main synchronous rectification switch, significantly reducing conduction losses and improving overall conversion efficiency. - Power Tools/Garden Tool Motor Drives – 70A high current drive capability, combined with low on-resistance, easily handles locked rotor and impact loads. - Vehicle Power Supplies/Automotive Electronics – 40V withstand voltage covers 12V/24V system transient overvoltage, providing reliable power switching for components like lights and pump motors. - Server Power Supplies/Communication Power Supplies – Replaces traditional DPAK devices in limited board space, increasing power density and simplifying thermal design. - Battery Management Systems (BMS)/Protection Boards – Milliohm-level on-resistance reduces heat accumulation in energy storage systems, supporting high-rate charge/discharge circuits. - Motor Controllers/Drone Power Systems – Fast switching and low loss characteristics enable higher frequency control and longer battery life.
**One-sentence summary:** The DMNH4006SPS-13-VB is more than just a high-current MOS tube; it is the "Hardcore Heart" and "Loss Killer" in your high-power-density designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
*To request free samples, please complete and submit the following information. Our team will review your application within 24 hours and arrange shipment upon approval. Thank you!
X
SN Check
***Serial Number Lookup Prompt**
1. Enter the complete serial number, including all letters and numbers.
2. Click Submit to proceed with verification.
The system will verify the validity of the serial number and its corresponding product information to help you confirm its authenticity.
If you notice any inconsistencies or have any questions, please immediately contact our customer service team. You can also call 400-655-8788 for manual verification to ensure that the product you purchased is authentic.
Download now
中文
English
Back to previous page.png)
