Featured Model

Your present location > Home page > Featured Model

MCH6307-G-TL-E-VB Product details

Product introduction:

You are designing a compact battery-powered device with tight PCB area constraints, yet requiring a stable negative voltage power switch. Ordinary PMOS either has too large a package or high conduction loss. VBsemi MCH6307-G-TL-E-VB is born for this—it compresses -20V withstand voltage, -4A current carrying capacity, and an on-resistance as low as 34mΩ into the ultra-small SC70-6 package, making low-power portable design effortless.

File download

Download PDF document
Download now

VBsemi online shopping mall:

Product parameter:

VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds2.5 Rds4.5 Rds10 Technology
SC70-6 Single-P -20V -0.6V -4A 45(mΩ) 34(mΩ) Trench
VB Package Configuration VCE VGE VGEth(V) VCEsat15V ICE Technology
SC70-6 Single-P Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds18 Technology
SC70-6 Single-P -20V -0.6V -4A Trench
VB Package Configuration VDS(V) VGS Vthyp(V) ID(A) Rds6 Technology
SC70-6 Single-P -20V -0.6V -4A Trench
VB Package Polarity Vz / VR Pd VF IF IR Cd Type
SC70-6 Single-P

Voltage rating -20V, fully meets low-voltage battery and load management requirements
Gate drive range ±20V, compatible with 2.5V~12V logic signals
Threshold voltage -0.6V, easily turns on with low-voltage drive
On-resistance 45mΩ (2.5V drive) / 34mΩ (4.5V drive), lower loss
Maximum current -4A, small package can carry considerable current
Trench process, excellent switching performance

Domain and module applications:



Lithium Battery Protection Circuit – As a load switch or discharge tube, precisely controls on/off, effectively protecting the cell from over-discharge damage.
Wearable Devices/Smart Bracelets – Ultra-small SC70-6 package saves valuable space, low on-resistance extends standby time.
Portable Audio Equipment – Used for switch control of negative voltage power rails, low noise and voltage drop, ensuring clean audio signals.
E-Cigarettes/Small Appliance Control Boards – Low threshold voltage allows direct drive by MCU GPIO, simplifying peripheral circuits.
LED Drive/Backlight Control – P-channel topology facilitates high-side switching, enabling stepless dimming and low-power standby.
Battery-Powered IoT Sensors – Fast switching between microamp standby and milliamp operating states, reducing system static power consumption.
DC-DC Synchronous Rectification Module – Replaces Schottky diodes on the low-voltage side, improving conversion efficiency and reducing heat buildup. One Sentence Summary: MCH6307-G-TL-E-VB is not an ordinary PMOS; it is the "space ninja" and "power steward" for your low-voltage portable designs.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features

Technical support:

* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours

Sample Req

QQ

Telephone

400-655-8788

WeChat

Shopping

Topping

Sample Req
Online
Telephone
WeChat