Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SC70-6 |
Single-N |
30V |
|
1.7V |
4.5A |
|
27(mΩ) |
23(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| SC70-6 |
Single-N |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| SC70-6 |
Single-N |
30V |
|
1.7V |
4.5A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| SC70-6 |
Single-N |
30V |
|
1.7V |
4.5A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| SC70-6 |
Single-N |
|
|
|
|
|
|
|
VDS=30V: Suitable for 5V/12V/24V systems, provides sufficient voltage spike margin, reduces avalanche breakdown risk. VGS=±20V: Compatible with 1.8V~12V logic levels, can directly connect to MCU/PMIC, eliminating level-shifting circuits. Vth=1.7V (Typical): Still enters full conduction region under low-voltage drive, especially suitable for battery voltage decay scenarios. RDS(on)=27mΩ @ VGS=4.5V / 23mΩ @ VGS=10V: Low on-resistance covers various drive voltages, significantly reduces temperature rise under full load, can reduce heat sink copper area. ID=4.5A: Continuous current margin is ample, can handle peak demands of most portable and auxiliary loads. Package SC70-6: Ultra-small size, low parasitic parameters, supports high-frequency switching, greatly saves PCB area and assembly cost.
Domain and module applications：
Portable Device Power Management: Low on-resistance improves boost/buck efficiency, extends battery life, SC70-6 package facilitates ultra-thin design. Battery Protection Module: Fast response ensures microsecond shutdown during overcurrent/short circuit, low on-resistance reduces self-heating of the protection board. Low-Voltage Motor Drive: Low PWM switching losses, smoother motor operation, significantly reduced controller temperature rise. Consumer Electronics Control Module: Logic level drive simplifies peripherals, suitable for high-volume, low-cost products like smart wearables, USB switches. LED Lighting Drive: Low conduction voltage drop reduces constant current source power consumption, supports multi-channel parallel connection, improves overall luminaire efficiency.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
