中文
English
VB262K Product details
Back to previous pageProduct introduction：
**VB262K Product Introduction**
VB262K is a high-performance P-channel MOSFET in SOT23-3 package, suitable for high-efficiency switching applications. The device has a -60V withstand voltage capability and a ±20V gate drive voltage range, and can be turned on at a low gate voltage of -1.7V. Its on-resistance is as low as 2000mΩ (maximum) and supports a maximum continuous drain current of -0.5A. VB262K uses advanced Trench process, provides excellent switching performance and low power consumption characteristics, and is widely used in portable devices, power management, motor drive and other fields.
---
VB262K is a high-performance P-channel MOSFET in SOT23-3 package, suitable for high-efficiency switching applications. The device has a -60V withstand voltage capability and a ±20V gate drive voltage range, and can be turned on at a low gate voltage of -1.7V. Its on-resistance is as low as 2000mΩ (maximum) and supports a maximum continuous drain current of -0.5A. VB262K uses advanced Trench process, provides excellent switching performance and low power consumption characteristics, and is widely used in portable devices, power management, motor drive and other fields.
---
File download
Download PDF document
Download now
Product parameter：
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| SOT23-3 | Single-P | -60V | 20V（±V） | -1.7V | -0.5A | 3000(mΩ) | 2000(mΩ) | Trench |
**VB262K Detailed Parameter Description**
| **Parameter** | **Value** | **Unit** | **Remark** |
|-------------|----------|---------|----------|
| **Package Type** | SOT23-3 | / | Small Surface Mount Package|
| **Polarity** | P-Channel| / | / |
| **Drain-Source Voltage (VDSS)** | -60 | V | Maximum Withstand Voltage|
| **Gate Drive Voltage (VGS)** | ±20 | V | Allowable Gate Voltage Range|
| **Threshold Voltage (VGS(th))** | -1.7 | V | Typical Value|
| **On-Resistance (RDS(on))** | 3000 (Typical) / 2000 (Maximum) | mΩ | VGS = -10V |
| **Maximum drain current (ID)** | -0.5 | A | Maximum continuous current|
| **Process type** | Trench | / | Provides lower on-resistance and better switching performance|
---
| **Parameter** | **Value** | **Unit** | **Remark** |
|-------------|----------|---------|----------|
| **Package Type** | SOT23-3 | / | Small Surface Mount Package|
| **Polarity** | P-Channel| / | / |
| **Drain-Source Voltage (VDSS)** | -60 | V | Maximum Withstand Voltage|
| **Gate Drive Voltage (VGS)** | ±20 | V | Allowable Gate Voltage Range|
| **Threshold Voltage (VGS(th))** | -1.7 | V | Typical Value|
| **On-Resistance (RDS(on))** | 3000 (Typical) / 2000 (Maximum) | mΩ | VGS = -10V |
| **Maximum drain current (ID)** | -0.5 | A | Maximum continuous current|
| **Process type** | Trench | / | Provides lower on-resistance and better switching performance|
---
Domain and module applications：
**Application fields and module examples**
1. **Power management for portable electronic devices**
VB262K is suitable for load switch applications in portable devices such as smartphones and tablets. Its low on-resistance and small package characteristics help improve power conversion efficiency and save PCB space.
2. **DC motor drive**
In small DC motor drive applications, VB262K can be used as a switching device for low-power motors. For example, in the drive circuit of a camera pan/tilt or small smart home appliances, this MOSFET acts as a key switching element in the H-bridge circuit to achieve efficient drive control.
3. **LED lighting drive**
Suitable for LED dimming and drive circuits, VB262K can perform efficient switch control through PWM signals to achieve energy saving and life optimization of LED lighting. It is commonly used in low-power LED lamps or backlight drive modules.
4. **Battery protection and management**
In the battery management system (BMS), this MOSFET can be used for over-discharge protection, charge and discharge control and other functions of lithium batteries. For example, VB262K can be used as a protection switch for battery packs to effectively prevent over-discharge or short-circuit damage.
5. **Industrial control and automation**
In low-voltage industrial control systems, VB262K can be used for relay drive, signal isolation and other applications. For example, in a PLC control unit, this MOSFET can be used as a switch control device to improve the reliability and response speed of the system.
Due to its compact package, high voltage resistance and low power consumption, VB262K is widely used in consumer electronics, industrial control, smart home and other fields.
1. **Power management for portable electronic devices**
VB262K is suitable for load switch applications in portable devices such as smartphones and tablets. Its low on-resistance and small package characteristics help improve power conversion efficiency and save PCB space.
2. **DC motor drive**
In small DC motor drive applications, VB262K can be used as a switching device for low-power motors. For example, in the drive circuit of a camera pan/tilt or small smart home appliances, this MOSFET acts as a key switching element in the H-bridge circuit to achieve efficient drive control.
3. **LED lighting drive**
Suitable for LED dimming and drive circuits, VB262K can perform efficient switch control through PWM signals to achieve energy saving and life optimization of LED lighting. It is commonly used in low-power LED lamps or backlight drive modules.
4. **Battery protection and management**
In the battery management system (BMS), this MOSFET can be used for over-discharge protection, charge and discharge control and other functions of lithium batteries. For example, VB262K can be used as a protection switch for battery packs to effectively prevent over-discharge or short-circuit damage.
5. **Industrial control and automation**
In low-voltage industrial control systems, VB262K can be used for relay drive, signal isolation and other applications. For example, in a PLC control unit, this MOSFET can be used as a switch control device to improve the reliability and response speed of the system.
Due to its compact package, high voltage resistance and low power consumption, VB262K is widely used in consumer electronics, industrial control, smart home and other fields.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
