Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| TO220 |
Single-P |
-60V |
|
-1.7V |
-40A |
|
|
62mΩ |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| TO220 |
Single-P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| TO220 |
Single-P |
-60V |
|
-1.7V |
-40A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| TO220 |
Single-P |
-60V |
|
-1.7V |
-40A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| TO220 |
Single-P |
|
|
|
|
|
|
|
II. Detailed parameter description of MTP2955V-VB
| **Parameter** | **Value** | **Description** |
|-----------------|------------------------------|----------------------------------------|
| **Package** | TO-220 | Three-pin package, suitable for power circuit applications|
| **Configuration** | Single P channel | Suitable for efficient current control|
| **Drain-source voltage (VDS)** | -60V | Maximum voltage that the device can withstand|
| **Gate voltage (VGS)** | ±20V | Gate drive voltage range|
| **Turn-on threshold voltage (Vth)** | -1.7V | Minimum gate voltage required for MOSFET to turn on|
| **RDS(ON)@VGS=4.5V** | 74mΩ | On resistance at 4.5V gate drive|
| **RDS(ON)@VGS=10V** | 62mΩ | At 10V On-resistance when gate driven|
| **Maximum drain current (ID)** | -40A | Maximum current the device can carry continuously|
| **Technology** | Trench | Provides lower on-resistance and higher current handling capability|
---
Domain and module applications：
III. Application fields and module examples of MTP2955V-VB
1. **Motor drive control**
- In the drive circuit of DC motor and stepper motor, it is used for P-channel switch control on the low voltage side to provide reverse current protection and fast switching.
2. **DC-DC converter**
- Used for synchronous rectifier in power module, which helps to improve energy efficiency and reduce power consumption, especially suitable for notebook computers and vehicle power management modules.
3. **Battery management system (BMS)**
- In the charge and discharge management of lithium battery packs, P-channel MOSFET can effectively control the current direction to ensure the safety and high efficiency of battery charging.
4. **Load switch application**
- Suitable for controlling external loads such as lights and solenoid valves, and realizing energy-saving management and remote control through the switching action of MOSFET.
5. **Consumer Electronics**
- In smart home devices, LED driver circuits, used in power control modules to extend device life and reduce standby energy consumption.
---
MTP2955V-VB is an ideal P-channel MOSFET for scenarios requiring efficient switch control and power management. It excels in motor control, power conversion, and battery management, supporting a variety of high-reliability applications.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
