Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOP8 |
Dual-N+P |
±20V |
|
1.0/-1.2V |
15/-8.5A |
10/20mΩ |
|
|
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| SOP8 |
Dual-N+P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| SOP8 |
Dual-N+P |
±20V |
|
1.0/-1.2V |
15/-8.5A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| SOP8 |
Dual-N+P |
±20V |
|
1.0/-1.2V |
15/-8.5A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| SOP8 |
Dual-N+P |
|
|
|
|
|
|
|
II. Detailed parameter description of CEM2539A-VB
1. **Package type**: SOP8
2. **Configuration**: Dual-N+P-Channel
3. **Drain-source voltage (VDS)**: ±20V
4. **Gate-source voltage (VGS)**: 12V (±)
5. **Threshold voltage (Vth)**: 1.0V (N-Channel); -1.2V (P-Channel)
6. **On-resistance (RDS(ON))**:
- N-Channel: 10mΩ @ VGS=2.5V; 6mΩ @ VGS=4.5V
- P-Channel: 20mΩ @ VGS=2.5V; 16mΩ @ VGS=4.5V
7. **Continuous drain current (ID)**: 15A (N-Channel); -8.5A (P-Channel)
8. **Technology**: Trench
Domain and module applications：
## III. Application fields and modules of CEM2539A-VB
#### 1. **Power management**
CEM2539A-VB performs well in power management modules. Due to its low on-resistance and high current handling capability, it can effectively reduce power loss and improve the efficiency of the overall system. This makes it very suitable for use in high-efficiency power conversion and voltage regulation circuits.
#### 2. **DC-DC converter**
In DC-DC converters, CEM2539A-VB provides an efficient current switching solution. Its low on-resistance ensures efficient energy conversion under high-frequency operation, and can maintain good performance and reliability in high-current applications.
#### 3. **Load switch**
This MOSFET is also very suitable for load switching applications such as motor drive and lighting control. Its bipolar configuration allows flexible switching of different types of loads in the same circuit, while its high current capability ensures stable and reliable switching operation.
#### 4. **Battery Management**
CEM2539A-VB can be used in battery management systems, especially in applications where batteries need to be protected from overcurrent or short circuits. Its high current handling capability and low on-resistance help ensure battery safety and long life.
#### 5. **Communication Equipment**
In communication equipment, CEM2539A-VB can be used for power switching and signal switching. Its low threshold voltage and high current capability make it excel in signal processing and power control, suitable for high-frequency and high-efficiency communication applications.
Overall, CEM2539A-VB is an ideal choice for a variety of high-performance electronic circuit designs with its excellent performance and versatility.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
