Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SC70-3 |
Single-P |
-60V |
|
-1.7V |
-0.135A |
|
5000(mΩ) |
4000(mΩ) |
Trench |
| VB Package |
Configuration |
VCE |
VGE |
VGEth(V) |
VCEsat15V |
ICE |
Technology |
| SC70-3 |
Single-P |
|
|
|
|
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| SC70-3 |
Single-P |
-60V |
|
-1.7V |
-0.135A |
|
Trench |
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds6 |
Technology |
| SC70-3 |
Single-P |
-60V |
|
-1.7V |
-0.135A |
|
Trench |
| VB Package |
Polarity |
Vz / VR |
Pd |
VF |
IF |
IR |
Cd |
Type |
| SC70-3 |
Single-P |
|
|
|
|
|
|
|
Detailed parameter description
- **Package type**: SC70-3
- **Configuration**: Single-P-Channel
- **Drain-source voltage (VDS)**: -60V
- **Gate-source voltage (VGS)**: ±20V
- **Threshold voltage (Vth)**: -1.7V
- **On-resistance (RDS(ON))**:
- 5000mΩ @ VGS=4.5V
- 4000mΩ @ VGS=10V
- **Drain current (ID)**: -0.135A (negative value indicates drain to source current)
- **Technology**: Trench
Domain and module applications：
Applications and module examples
5HP02M-VB is suitable for a variety of low-power applications. Here are some typical application examples:
1. **Mobile Devices**:
- In mobile phones, tablets and portable electronic devices, it is used as a low-power switch and power management device to extend battery life and improve energy efficiency.
2. **Battery Protection**:
- In charging circuits and battery management systems, it is used to protect batteries from damage caused by overcurrent and short circuits, ensuring battery safety and long life.
3. **Signal Switching**:
- In low-frequency signal processing and signal switching circuits, it is used as a signal routing and switch controller to keep signal transmission clear and reliable.
4. **Sensor Interface**:
- In sensor interface circuits, it is used as a front-end circuit for sensor signal processing and amplification to ensure accurate acquisition and processing of sensor data.
5. **Portable Electronics**:
- Used for power switching and low-power mode control in portable audio devices, electronic toys and smart wearable devices to optimize the energy efficiency and performance of the device.
The design and features of the 5HP02M-VB make it an ideal choice for low-power applications, providing reliable performance and efficient energy management solutions.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
