Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| DFN8(5X6) |
Single-P |
-30V |
20（±V） |
-3V |
-120A |
|
6 (mΩ) |
4 (mΩ) |
Trench |
Has the following main parameters:
The operating voltage VDS is -30V, the gate-source voltage VGS is ㊣20V, the threshold voltage Vth is -3V, the on-resistance when VGS=4.5V is 6m次, the on-resistance when VGS=10V is 4m次, and the maximum leakage current The ID is -120A.
Domain and module applications：
VBQA2305 is suitable for application modules in a variety of fields, such as:
1. Power management module: In power management systems that require high power and efficiency, VBQA2305 can be used as a power switching device to control the switching and regulation of the power supply. Its low on-resistance and high leakage current characteristics allow it to operate at high frequencies, such as for power switching modules in server power modules and power inverters.
2. Electric vehicle drive module: In the drive system of electric vehicles, VBQA2305 can be used to control the motor and battery system of electric vehicles. Its high current and low on-resistance characteristics enable it to provide efficient power conversion and management, such as for use in motor controller modules in electric vehicles.
3. LED lighting driver module: In LED lighting systems, VBQA2305 can be used to control the brightness and stability of LED lights. Its high current and low on-resistance characteristics make it suitable for high-power applications in LED lighting systems, such as LED driver modules in indoor lighting systems.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page.png)
