VBsemi's VBGP1102 is a Single N-type field effect transistor (FET) with the following key parameters:
- Maximum drain-source voltage (VDS) is 100V, suitable for higher voltage applications.
- The maximum gate-source voltage (VGS) is plus or minus 20V, with high voltage tolerance.
- The gate threshold voltage (Vth) is 3V, indicating that the device has a lower gate voltage.
- The on-resistance at VGS=10V is 2.4mΩ, showing very low on-resistance.
- The maximum drain current (ID) is 180A, with high current handling capability.
- Using SGT (Superjunction Gate Trench) technology, it has lower on-resistance and higher performance.
- The package is TO247, suitable for power device applications.
VBGP1102 is suitable for various application fields that require high voltage, large current and low on-resistance, providing reliable power switching solutions for modules in different fields.
Download now
| VB Package | Configuration | VDS(V) | VGS | Vthyp（V） | ID(A) | Rds2.5 | Rds4.5 | Rds10 | Technology |
|---|---|---|---|---|---|---|---|---|---|
| TO247 | Single-N | 100V | 20（±V） | 3V | 180A | 2.4(mΩ) | SGT |
parameter:
-Single N
- VDS(V): 100
-VGS(㊣V): 20
-Vth(V): 3
- VGS=10V(m次): 2.4
-ID(A): 180
- Technology: SGT
Package: TO247
Application Introduction:
VBGP1102 is suitable for a variety of fields and modules, including but not limited to:
1. **Industrial power module**: Due to its high voltage tolerance and current carrying capacity, VBGP1102 can be used as power switching devices in industrial power modules, such as industrial inverters, welding equipment, etc., to provide stable and reliable power control. .
2. **Electric Vehicle Charging Pile**: This device has very low on-resistance and high current carrying capacity, and is suitable for use in power switching circuits in electric vehicle charging piles to provide efficient charging solutions.
3. **Wind power controller**: VBGP1102 can also be used in power switching circuits in wind power controller modules, such as frequency converters and inverters, to provide stable power control and conversion efficiency.
4. **Industrial automation equipment**: Due to its stable and reliable performance, VBGP1102 can be used in power switching circuits in industrial automation equipment modules, such as PLC (programmable logic controller) and industrial computers, to provide efficient power control and drive ability.
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
* If you need to request samples from our company, please fill out the form and submit it. We will respond within 24 hours.
中文
English
Back to previous page
