Product introduction：
PMV160UP-VB is a P-Channel SOT23-3 package field effect tube. It has a maximum operating voltage of -20V, a maximum current of -4A, and RDS(ON) of 65(mΩ), 80(mΩ)@VGS=2.5V, 60(mΩ)@VGS=10V; @VGS=4.5V, VGS=12V. Its threshold voltage is -0.81V. PMV160UP-VB has a wide range of application potential in scenarios where P-Channel field effect tubes are required, such as power management, current control and other modules.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOT23-3 |
Single-P-Channel |
-20V |
12（±V） |
-0.8V |
-4A |
80（mΩ） |
65(mΩ) |
60(mΩ) |
|
Product model: PMV160UP-VB - Silk screen: VB2290 - Brand: VBsemi - Parameters: - Package: SOT23-3 - Channel type: P—Channel - Maximum operating voltage: -20V - Maximum current: -4A - RDS(ON): 65(mΩ), 80(mΩ)@VGS=2.5V, 60(mΩ)@VGS=10V; @VGS=4.5V, VGS=12V - Threshold voltage(Vth): -0.81V
Domain and module applications：
1. **Power management module:** Due to its P-Channel characteristics and moderate current capacity, PMV160UP-VB can be widely used in power management modules for battery protection, power switch and other functions. 2. **Current control module:** Suitable for modules that require precise control of current, such as motor drive modules, LED drive modules, etc. 3. **Signal amplifier:** Can be used as a key component of a signal amplifier to amplify weak signals, such as in sensor interface circuits.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
