Product introduction：
**VBsemi DMN2050L-7-VB** **Silkscreen:** VB1240 **Brand:** VBsemi **Package:** SOT23 **Detailed parameter description:** - **Type:** N-Channel channel, suitable for applications responsible for current conduction.
- **Rated voltage:** 20V, indicating the maximum voltage that the device can withstand during normal operation.
- **Rated current:** 6A, specifies the maximum current that the device can operate stably.
- **On-state resistance:** RDS(ON)=RDS(ON)=28(mΩ)@VGS=4.
5V,42（mΩ）@VGS=2.
5V; VGS=8V, characterizes the resistance of the device when it is in the on state.
The smaller the value, the better the performance in the on state.
- **Threshold voltage:** 0.
5~1.
5V, specifies the gate voltage range at which the device starts to conduct.
**Application Introduction:** VBsemi DMN2050L-7-VB is an N-Channel SOT23 package field effect transistor (FET) suitable for a variety of current control and switching applications.
Its low on-resistance and moderate voltage/current ratings make it widely used in various electronic devices.
File download
Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds2.5 |
Rds4.5 |
Rds10 |
Technology |
| SOT23-3 |
Single-N-Channel |
20V |
12（±V） |
0.5~1.5V |
6A |
42（mΩ） |
28(mΩ) |
|
|
**parameter: ** -Package: SOT23 -type:N-ChannelChannel -Rated voltage: 20V -Rated current: 6A -On-state resistance (RDS(ON)):RDS(ON)=28(mΩ)@VGS=4.
5V,42（mΩ） @VGS=2.
5V; VGS=8V -Threshold voltage (Vth):0.
5~1.
5V
Domain and module applications：
**Main application areas:** 1.
**Power Management: **For use in power switches, voltage regulators, and other power management modules.
2.
**Current control: **Suitable for motor drive,ledDrive and other occasions that require precise current control.
3.
**Switching Power Supply: **Used in the switching part of the switching power supply to achieve efficient energy conversion.
**Corresponding module:** 1.
**Power module: **Due to its application in power management, it can be used to build stable and efficient power modules.
2.
**Motor Control Module: **It plays a role in motor drive modules that require current control.
3.
LEDDriver module: **To achieveledPrecise control of brightness.
Please note that the specific design and application depends on the project requirements and operating conditions.
It is recommended to read the device data sheet and application guide in detail before use.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
