Product parameter：
| VB Package |
Configuration |
VDS(V) |
VGS |
Vthyp（V） |
ID(A) |
Rds18 |
Technology |
| TO247 |
Single-N |
1200V |
-10 / +22 |
2~4 |
100A |
21 |
|
- **VDS(V):** The nominal drain-source voltage is 1200V, indicating normal operation within this voltage range.
- **VGE(±V):** The gate-source voltage range is -10V to +22V, which means it can accept control signals from negative 10V to positive 22V.
- **Vthtyp(V):** The gate-source threshold voltage range is 2 to 4V, indicating that a voltage above 2 to 4V must be applied to turn the transistor on.
- **RDS(on)@VGS=18Vtyp(mΩ):** When 18V is applied between gate and source, the typical on-resistance in the on-state is 21mΩ, indicating the resistance performance in the on-state.
- **ID (A):** The maximum drain current is 100A, indicating the maximum operating current that can be tolerated.
- **Technology:** Adopts SiC-S (silicon carbide semiconductor) technology, which means it is made of silicon carbide semiconductor material and has high temperature and high frequency characteristics and low on-resistance.
Domain and module applications：
* * Application introduction and examples: * *
1. * * Power conversion module: * * Because VBP112MC100 has the characteristics of high voltage and high current, it is suitable for power conversion module, such as power inverter, frequency converter and motor driver. In these applications, it can be used as a switching device to control power conversion and regulation, with the advantages of fast switching and low on resistance, helping to improve the efficiency and reliability of the system.
2. * * Power grid applications: * * In the power grid, VBP112MC100 can be used in the HVDC transmission system and converter modules to control the transmission and regulation of power. Its high voltage and high current characteristics enable it to support high power transmission in the grid, and it has high temperature and high frequency characteristics and low on resistance, which helps to improve the stability and reliability of the grid.
3. * * Electric vehicle charging pile: * * In the electric vehicle charging pile, VBP112MC100 can be used as a switch pipe to control the charging current and charging voltage and realize the rapid charging of electric vehicles. Its high voltage and high current characteristics enable it to support the charging demand of high power, and has high temperature and high frequency characteristics and low on resistance, helping to improve the charging efficiency and safety.
The above is the detailed parameter description and application introduction of VBP112MC100 products, which is suitable for power conversion modules, power grid applications and electric vehicle charging pile.
* Please note: the above is only an example application scenario, the specific application depends on the requirements and conditions of the system design. When using this device, consult its data sheet for detailed technical specifications and features
Technical support：
* If you have any questions about the product, please fill out the form to submit, we will reply you within 24 hours
Download now
中文
English
Back to previous page
